Our assignment yesterday was to break down and rebuild an air handler as well as a condenser. Not only did this project test HVAC hands-on skill level, but it also allowed future technicians practice explaining in plain English to “Mrs. Smith” what the parts do.

We push hard on how the “Customer Service” aspect in HVAC must be in the forefront. After all, HVAC is customer service all the way.

HVAC Scrapping is part of the job

At the conclusion of yesterday’s assignment, all were tasked to scrapping.

Scrapping HVAC and AC units involve safely draining refrigerants, stripping outer panels, and separating valuable copper tubing, aluminum-copper coils, and electric motors to maximize profit at local metal recycling yards.

Like always, safety is an important habit to form. When it comes to scrapping, it is suggested to wear heavy-duty gloves and safety glasses when handling sharp sheet metal or using power tools, in this case we used a reciprocating saw (often referred to as a Sawzall).

From system birth (new system swap), to diagnostics and troubleshooting, to component testing and replacement, to the end (scrapping), you will do it all.

Dreaming of a career in the HVAC Industry? Give me a call or visit our website, schedule a chat and/or submit an enrollment form. Next term begins September 8^th so you best get on it today.

Check out the photos, like, comment, and share.

Danny
407-878-0474

The amount of hands-on learning over the past four weeks has been insane. Think about it, three complete systems new installs, building distribution boxes, running flex, breaking down and reinstalling multiple air handlers and condensers, and this is just the tip of what has been accomplished.

HVACTA Training Accelerated

What can you learn in four weeks?

At HVAC Technical Academy, you will be learning, living, and doing HVAC life in its fullest. Our six-week learn-by-doing approach is unlike any other program out there. To gain a glimpse of what YOU will be doing, look at the photos presented over the past month (or several years).

Dreaming of a career in the HVAC Industry? Give me a call or visit our website, schedule a chat and/or submit an enrollment form. Next term begins September 8^th so you best get on it today.

Danny

Today we are combining two of my favorite things: pizza and HVAC.

All participants are working hard and handling an appetite to match as this afternoon we will be working with air flow distribution… plenum / return boxes here we come.

HVAC Break Down: Pizza and Learning

Taking advantage of Hungry Howie’s Whacky Wednesday, all got their slices and drinks. My favorite flavor is the Hawaiian (gotta have pineapple) while we ordered six other flavors to feed the need.

When it comes to the learning part, here’s a sketch of what we do at HVAC Technical Academy:
* Fundamentals: understanding refrigeration theory and air conditioning systems
* Technical skills: working with hand tools, brazing, gauges, vacuum/recovery, etc.
* Safety and Compliance: keeping the environment and participants safe… in addition to obtaining their Universal 608 Certification, all also go through OSHA 10 General Industry training
* Diagnostics: from complete system swaps, component replacements, diagnostics, troubleshooting, to performing preventive maintenances

We are not just an HVACT workshop, our methods are guided by building lasting relationships, personal growth, and practical knowledge, skills, and abilities while mixing hands-on, theory, and safety upon each step in the path.

Questions, give me a call, make comments, email.

Danny

Heard it say journeys all begin with one step… and then another… and so the steps go on and on. When it comes to entering one of the most in-demand careers, HVAC, for many, the first step begins at HVAC Technical Academy… when researching why, it’s pretty clear.

HVAC Journeys begin with HVAC Technical Academy

As mentioned recently, the demand for HVAC technicians is outpacing just about all other industries. In Florida, the need for qualified HVAC Service Technicians is projected to increase 13% to 15%. In other words, no better time than NOW to get on YOUR HVAC journey leading to personal and professional success… and in less than two months!

HVAC Technical Academy is in Sanford, Florida. Our 6-week (210 hours) workshop focuses on an aggressive hands-on teaching style where YOU perform full system swaps, component diagnostic replacements, part analysis, vacuum, recovery, duct/plenum build, brazing, preventive maintenances, and much more. Professional tools are also part of this program… upon completion you will be equipped and prepared to get the job done while the Universal 608 Certification prep and taking as well as OSHA 10 General Industry are inclusive.

Serious about working in the HVAC Industry, partnering with HVAC Technical Academy is the right choice.

It is going to be a great six weeks! Wish you were here…

Interested in getting into the HVAC industry in less than two months, consider HVAC Technical Academy.

Danny

Yesterday the day was filled with rain… not the best day one but then again, the first week is designed to dig deep into understanding HVAC systems, components, and safety. Overall, we were productive on many levels.

HVACTA: Group Day Two Photo and Warm Up

Day two is about development and seamlessly getting into HVAC industry expectations from an employer, client, and technician perspective. In addition we came together as one unified group as the photos detail.

Participants are expected to learn the complete HVAC cycle, including proper procedures for using a dolly to take a condenser off the trailer.

Gotta run as a new system is heading down the road and we need to take it off the trailer, inspect, and ensure all paperwork is correct… yep, we do it all.

Interested in getting into the HVAC industry in less than two months, consider HVAC Technical Academy.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
DHuffman@HVACTA.com

All received a unique experience this morning as the group reviewed first-hand knowledge and applications regarding commercial chillers from the Allegiant Air Training Center.

HVACTA – Allegiant Air Training Center Field Trip

Though our program concentrates on residential, we do throw in the commercial side of HVAC when we can. Definitely looking forward to introducing our participants to the chiller side of HVAC as our commercial relationships widen.

Looking for an in-demand career, HVAC may be the path. Give me a call and let’s find out.

Danny
407-878-0474
2^nd Chance University
HVAC Technical Academy
DHuffman@HVACTA.com
Sanford, Florida

All participants are working hard and getting an appetite to match. Each term we show appreciation to their commitment one slice at a time!

HVACTA: Time for a Pizza Break

We are not just an HVACT workshop, our methods are guided by building lasting relationships, personal growth, and practical knowledge while mixing hands-on, theory, and safety upon each step in the path.

We have a solid group, and I am personally honored to be part of their life-long journey.

With much appreciation,

Danny
407-878-0474
2^nd Chance University
HVAC Technical Academy
DHuffman@HVACTA.com
Sanford, Florida

Today was a day to expand hands-on knowledge regarding package units. Taking advantage of a neighboring live system, our group performed like pros.

HVACTA – Package Unit

HVACTA is about learning the industry by doing. From package units to Mini splits to split systems, participants get their hands in the mix. Supporting a learn by doing approach, workshops delve deeply into safety, theory, and customer relations.

If you enjoy daily challenges, working with your hands, and never a dull moment, the HVAC industry may be a good fit for you.

Danny
407-878-0474
2^nd Chance University
HVAC Technical Academy
Certifications and Safety
DHuffman@HVACTA.com
Sanford, Florida

Ensuring all participants excel in brazing, no matter the conditions and/or angle, each is put to the test daily. Backed by a practice geared of challenge, growth becomes a reality.

HVACTA: Burn Baby Burn

After several hours/days of brazing, all are required to perform in the oddest situations. Often enveloped by cardboard, all practice flame lengths and positions. Truth is, better to burn under a controlled situation than at Mrs. Smith home… don’t you think?

Interested in entering the HVAC Industry from our 6-week workshop/program, give me a call to chat.

Danny
407-878-0474
2^nd Chance University
HVAC Technical Academy
DHuffman@HVACTA.com
Sanford, Florida

Nothing like a little fun competition to help learn key HVAC terms. On the first day of our workshop, we engaged in an HVAC keyword search. Finding 20 words in 15 minutes found a clear leader.

HVAC Day One: And the Winner IS…

Learning comes in many forms. At HVAC Technical Academy, our commitment is to take advantage of as many learning styles as possible. Today was no exception!

Taking the Lennox Cap trophy was no other than Daniel Alicea. Congratulations are in order, but we shall see if he is able to get the next trophy. Wondering what the challenge will be?

For those looking for an intensive 200-hour hands-on HVAC workshop, check us out.

Danny
407-878-0474
2^nd Chance University
HVAC Technical Academy
DHuffman@HVACTA.com
Sanford, Florida