+1 (407) 878-0474 info@Hvacta.com
HVACTA: Pump Down Tuesday

HVACTA: Pump Down Tuesday

by | Sep 10, 2024 | HVAC Technical Academy, HVAC Training, Universal 608 EPA

HVACTA: Pump Down TuesdayGetting more than mock practice, today is a day to perform a complete evaporator coil cleaning with two live systems… nothing like the real thing.

Pump Down Tuesday

Over the past few weeks we’ve been building solid HVAC fundamentals, performing system swaps, component diagnostics/replacement, gauge readings, and preventive maintenances. No doubt we have been busy.

Before storms visit this afternoon, this morning we will be getting down with a full evaporator coil cleaning… from start to finish.  Makes me wonder what we will be getting down and dirty with tomorrow.

During our 6-week workshop you get down with hands-on involvement… period! Wel even perform a complete heat pump system installation while developing HVAC Clarity, Choice, Confidence, and Competence.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
Sanford, Florida
Email: info@HVATA.com

HVACTA Group Performing Package PM

HVACTA Group Performing Package PM

by | Sep 4, 2024 | HVAC Technical Academy, HVAC Technician, Universal 608 EPA

HVACTA Group Performing Package PMToday we are performing preventive maintenance on an Air BnB neighbor. We were able to sneak a group photo, see if you recognize anyone… except for the old man at the end of the line.

Package Unit Preventive Maintenance

Though today we worked side by side with fellow participants, tomorrow we will begin conducting a round robin of preventive maintenance jobs. Overall, each will perform a pm on two package units, three mini-splits, two straight cool split systems, and one heat pump split system.

During our intensive six-week HVAC Workshop program, be prepared to LEARN by DOING! Looking forward to hearing from you soon as enrollment is happening NOW for the October session.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
Sanford, Florida
Email: info@HVATA.com

HVACTA: Air Flow Prep

HVACTA: Air Flow Prep

by | Aug 30, 2024 | HVAC Technical Academy, HVAC Training, Universal 608 EPA

HVACTA: Air FlowAir conditioning is all about air flow. We are closing out the week with flex and duct board work.

Duct Board Prep

It’s a hot day so one must be careful not to scratch after cutting duct board… as a few participants learned the hard way. Not to worry, a little practice will get you where you need to be.

During our intensive six-week HVAC Workshop program, be prepared to LEARN by DOING! Looking forward to hearing from you soon as enrollment is close to capacity (maximum of ten) and is happening NOW for the October session.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
Sanford, Florida
Email: info@HVATA.com

HVACTA Evaporator Coil Clean

HVACTA Evaporator Coil Clean

by | Aug 29, 2024 | HVAC Technical Academy, HVAC Training, Universal 608 EPA

Between system swaps, preventive maintenances, and troubleshooting, yesterday was a day of relaxing as we worked through the process to pull and clean an evaporator coil.

Evaporator Coil Pull and Clean

Never just another day at HVAC Technical Academy. With this said, tomorrow we will be designing and installing duct board as our air handlers need a return. Check it out tomorrow!

During our intensive six-week HVAC Workshop program, be prepared to LEARN by DOING! Looking forward to hearing from you soon as enrollment is happening NOW for the October session.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
Sanford, Florida
Email: info@HVATA.com

HVACTA Team in PM Mode

HVACTA Team in PM Mode

by | Aug 27, 2024 | HVAC Technical Academy, HVAC Training, Universal 608 EPA

HVACTA Team in PM ModeWith two successful system swaps yesterday, today we will work as a team while performing preventive maintenance.

HVACTA Team in PM

Though today we work side by side with fellow participants, soon each will be handling all preventive maintenance duties on their own. Good thing each participant has a new digital Fieldpiece gauge set.

During our intensive six-week HVAC Workshop program, be prepared to LEARN by DOING! Looking forward to hearing from you soon as enrollment is happening NOW for the October session.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
Sanford, Florida
Email: info@HVATA.com

HVACTA and Pizza… Oh Yeah

HVACTA and Pizza… Oh Yeah

by | Aug 22, 2024 | HVAC Technical Academy, HVAC Training, Universal 608 EPA

Slicing and Learning Sometimes there is nothing like pizza and HVAC to make learning the total package… today all shared the experience.

Slicing and Learning

After a quick pizza break, all headed outside to perfect brazing skills, package unit PMs, and getting to know their Fieldpiece digital gauges (theirs to use, theirs to keep).

407-878-0474
HVAC Technical Academy
Sanford, Florida
Email: info@HVACTA.com

Follow by Email
Facebook
X (Twitter)
YouTube
YouTube
WhatsApp