+1 (407) 878-0474 info@Hvacta.com
HVACTA – We Got the Flex

HVACTA – We Got the Flex

HVACTA – We Got the FlexUnderstanding the basic concepts of air flow, building distribution boxes, and running flex is an integral HVAC element and one which must be physically completed.

HVACTA – We Got the Flex

At our workshop facility, all work with duct board (building boxes), flex, mastic, tape, hangers, registers, and much more.

If you enjoy daily challenges, working with your hands, and never a dull moment, the HVAC industry may be a good fit for you.

Only one way to find out… For those looking for an intensive 200-hour hands-on HVAC workshop, think about HVAC Technical Academy as your next stop.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
DHuffman@HVACTA.com
Sanford, Florida

HVACTA: Group Photo March 2025

HVACTA: Group Photo March 2025

HVACTA: Group Photo March 2025We have one solid group readying to enter an HVAC journey toward personal and professional success. Even got a picture of our primary HVAC instructor, Robert. In case you are unsure, Robert is the one with the __________ legs (you fill in the blank).

HVACTA: Group Photo March 2025

Today the group was tasked to build boxes. Notice we have one participant duct knife ready… anyway, all got down and dirty with the board, mastic, and tape.

The photo depicts one of the hands-on working areas. Lots of HVAC projects are going on here.

Our 6-week HVAC workshop gets results and gets participants prepared to enter a career quickly with the knowledge, skills, and ability for success.

Interested in getting into the HVAC industry in less than two months, consider HVAC Technical Academy.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
DHuffman@HVACTA.com

HVACTA: Commercial Compressor

HVACTA: Commercial Compressor

HVACTA: Commercial CompressorToday all got their hands on a 175-pound commercial compressor. Andrew held mentorship to an eager group seeking knowledge and hands-on experience ate it up.

HVACTA: Commercial Compressor

Our philosophy is guided by practical knowledge mixed with theory and safety. Though concentrating on residential, when given the opportunity we get dirty with commercial equipment… never know what’s in store here. After all, one never knows what is in store at any call.

Looking for a hands-on approach to HVAC learning, give me a call to discuss.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
DHuffman@HVACTA.com
Sanford, Florida

HVACTA: Burn Baby Burn

HVACTA: Burn Baby Burn

HVACTA: Burn Baby BurnEnsuring all participants excel in brazing, no matter the conditions and/or angle, each is put to the test daily. Backed by a practice geared of challenge, growth becomes a reality.

HVACTA: Burn Baby Burn

After several hours/days of brazing, all are required to perform in the oddest situations. Often enveloped by cardboard, all practice flame lengths and positions. Truth is, better to burn under a controlled situation than at Mrs. Smith home… don’t you think?

Interested in entering the HVAC Industry from our 6-week workshop/program, give me a call to chat.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
DHuffman@HVACTA.com
Sanford, Florida

2nd Chance University, Dirk, and HVAC Simulator

2nd Chance University, Dirk, and HVAC Simulator

Dirk and HVAC SimulatorMany organizations and folks show and provide a great deal of support to our nonprofit, 2nd Chance University. Our HVAC program relies on this support, and we are truly grateful for Dirk and HVAC Simulator as they deserve formal appreciation for their generosity.

Dirk and HVAC Simulator

Dirk and HVAC Simulator provides an incredible resource which further facilitates the participant learning experience. Providing web-based simulations, Dirk orchestrates an effective teaching method allowing our HVAC facilitator-led learning environment to complement a hands-on/theory-based delivery for maximum results.

Driven to break the chains of recidivism, partnering with Dirk and HVAC Simulator delivers results on the individual AND communal scale.

Together, we are providing hope and a means to achieve a real future for many who have lost their way.

Thank you Dirk and HVAC Simulator for being part of 2nd Chance University.

On this note, 2nd Chance University is a registered nonprofit always appreciating support and/or donations of any kind.

Danny
407-878-0474
2nd Chance University
Sanford, Florida
Email: info@2ndChanceUniverity.org

 

HVACTA Sawzall Training and PPE

HVACTA Sawzall Training and PPE

HVACTA Sawzall Training and PPEWorking in the HVAC industry means handling hand equipment, including the reciprocating saw. This morning, we reviewed PPE and how to handle the saw.

Sawzall Training and PPE

Safety is paramount, thus today we dedicated reviewing Personal Protective Equipment and usage for the Sawzall. This is often used while onsite and for scrapping purposes. Currently the group is heading outside to work on scrapping… and on such a beautiful day!

HVACTA is a hands-on adult workshop facility located in Sanford, Florida, where “Learn by Doing” defines our approach to get YOU on a path to personal AND professional success. Background friendly, HVAC Technical Academy partnered with 2nd Chance University to help ALL desiring personal and professional success.

Danny
407-878-0474
2nd Chance University
HVAC Technical Academy
Sanford, Florida
Email: info@HVATA.com

Follow by Email
X (Twitter)
YouTube
YouTube
WhatsApp